You can save a lot of money by doing the very simple DIY job of installing a washing machine tap and spout tap. But the correct equipment and some basic plumbing expertise are needed. This tutorial will take you step-by-step through the procedure while offering useful hints and unambiguous directions.
Before starting, ensure you have the following tools and materials: adjustable wrench, pipe wrench, screwdriver, plumber’s tape, basin wrench, new washing machine tap and spout tap, water shut-off valves, and pliers.
Safety First
- Turn off the water: Find the main water shut-off valve and rotate it counterclockwise until it stops. During the installation process, this will stop water from flooding your house.
- Empty the system: Let any leftover water run out of your house by opening the taps. Your dealings with water will be lessened as a result of this.
Step-by-Step Guide
- Remove the Old Taps:
- Loosen and remove the old washing machine tap and spout tap with the basin wrench. Take caution not to harm the nearby area or the pipes.
- Clear the Pipes:
- To clean the pipes of any debris or mineral deposits, use a wire brush or pipe cleaner. This will guarantee that the new taps have a good seal.
- Set Up the Novel Taps:
- Cover the threads of the new taps with plumber’s tape. This will assist in stopping leaks.
- Using the adjustable wrench to tighten them firmly, screw the new taps into the pipes. Avoid overtightening, since this may cause damage to the taps.
- Connect the Water Supply Lines:
- Join the new taps to the water supply lines. Verify that the lines are attached to the hot or cold side of the taps.
- Utilizing the adjustable wrench, tighten the connections.
- Switch on the water supply and check the leaks:
- To get the water to flow, slowly turn the main shut-off valve counterclockwise.
- Examine the area around the connectors and taps for leaks. Tighten the connections or replace any broken pieces if you discover any leaks.
- To make sure the taps are operating correctly, turn them on and off a few times.
There are a few more things to consider while configuring your washing machine. First, think about connecting your washing machine to a regular faucet with a tap adapter if you don’t have a special tap for washing machines. This can offer a practical answer to your plumbing problems. A long-lasting and dependable installation can be ensured by investing in high-quality taps and water supply lines, which are additional essential components. Finally, it’s a good idea to employ a professional plumber if you have any doubts about your ability to handle plumbing duties or if the installation seems complicated. Their knowledge might help you avoid future problems and save time.
Conclusion
With the correct equipment and a little perseverance, installing a washing machine tap and spout tap is a reasonably easy process. Installing your new taps securely and successfully can be achieved by following the instructions provided in this tutorial.
Plumber Bathware provides a large selection of high-quality plumbing products and services, so you can choose to leave the work to the professionals if you have any questions about any element of the installation procedure. They have skilled plumbers who can handle any plumbing task, from straightforward fixes to intricate installations.