In the era of the internet, every device has its unique IP address through which it can be identified on a vast network. Apart from this, the IP address helps an individual to access and tweak the settings of the device to which it belongs. Considering the same thing, the Wireless-N WiFi repeater also has an IP address using which one can manage and monitor the home network. However, many stances have been reported where users find it difficult to complete the WiFi repeater login process and tweak the network settings.

The reason being, they are not able to access the Wireless-N repeater IP address. By any chance, if you are also finding it difficult to access this default gateway of the repeater, this write-up can help you out. Here, we’ve jotted down the potential causes behind the issue. However, the post is not limited to the reasons only. You’ll also get to know about the workarounds to be implemented in this very piece of writing. With that said, continue reading.

Why You Are Not Able to Access Wireless-N Repeater IP?

Cause 1: You’ve Used the Incorrect IP

The most obvious and common reason why the IP address denied to work for you is that it does not belong to your repeater. Yes, you read it right. Not every repeater supports the use of the same IP address. We’ve made it very clear at the beginning of the post that every networking gadget has its unique IP address and the same applies to your repeater. Therefore, you are suggested to check the user manual of the product before using the default IP. After using the correct IP, verify whether you get successful or not.

Cause 2: The Web Browser is Not Updated

The second potential cause behind the non-functional status of the Wireless-N WiFi repeater IP address might be the web browser in use. Just in case you are wondering how then remember that the browser used to access the repeater’s default IP address is supposed to be updated. If the web browser (no matter which one you are using) is not flaunting the latest software version, upgrade it to fix the problem at hand. Moreover, wipe out the cache and cookies of the browser.

Cause 3: Technical Glitches Attack

Being a part of the networking realm, a Wireless repeater is capable of becoming a victim of technical glitches. Chances are that you are failing to use its IP due to the same cause. Therefore, you must give your repeater a fresh start to kick off these network glitches. For this, unplug your repeater from the power source after disconnecting it from the main router. Then, consider waiting for a long interval; let us say, 30-45 minutes. Thereafter, reestablish the router-repeater link and power up the repeater.

Cause 4: An Active Antivirus Program

There is also a chance that an antivirus program on your computer is stopping you from using the IP address and reaching the WiFi repeater setup wizard. This is to inform you that antivirus software tends to hinder the user from managing networking devices. So, the only solution you are left with in this scenario is the disability of the antivirus program. However, you should not disable the antivirus permanently. It can expose your device to potential threats. Therefore, disable the software temporarily.

Cause 5: Weak Internet Connection

Lastly, the lack of a sound internet connection while accessing the Wireless-N repeater IP address can also be one of the reasons behind the problem. Thus, you should verify the internet connection status. For this, run a speed test on your PC and if you get poor results, check the cable connections related to your WiFi repeater. In case any of the cables linked to your repeater is found damaged, get it replaced with a new one. Moreover, be certain about the strength of the connection.

Summing Up

That’s all about what to do if the Wireless-N repeater IP address fails to work for you. We hope that you will be able to resolve the problem easily once you’re done following the aforementioned hacks. However, these tips won’t be of any good if there are typos in the IP entrée. Thus, be mindful of the same and always enter the IP address carefully.

Read more…