To cater to the need of accessing a robust internet connection across the length, breadth, and height of the house, people prefer installing a Victony range extender. However, not everyone has a rosy experience with the Victony experience. Some users have complained that even after performing Victony WiFi extender setup, their extender is not helping to boost signals. Are you also looking for a guide to fix the same issue? If yes, then have a glance look at the troubleshooting techniques mentioned below. They will help you get the issue fixed in a jiffy.

Fixed: Victony WiFi Extender Not Helping Boost Signals

1. Check the Ethernet Connection

Is the Ethernet cable connecting your Victony range extender and the main router all well? Looks like it isn’t. So, consider checking it. Did you find any cuts? Is it flipped from any point? If any of these questions have been answered in yes, then the time to bid a farewell to the existing Ethernet cable has come.

Know that a damage-free Ethernet cable won’t be of any use if the connection is not finger-tight. Thus, you should always ensure the firmness of the Ethernet connection.

2. Bring Your WiFi Devices Closer

Your Victony WiFi extender might also fail to help you boost signals if it is not placed close to the main router. This is to inform you that WiFi signal propagation becomes difficult when the distance separating the extender and router is too much.

Therefore, to get rid of the problem, it is recommended that you reduce the distance separating your devices. However, make sure that the distance is not reduced to zero. Else, you’ll soon find yourself struggling with another extender-related issue due to a clash of signals of your WiFi devices.

3. Update the Firmware

WiFi extender’s firmware updates are of great importance. It is because they fix performance bugs and add new features to your WiFi devices. Thus, doing firmware updates after accessing the Victony WiFi extender login page is nothing less than a double-edged sword that acts as the extender’s sentinel as well as the performance booster.

To update the Victony firmware, log in to your device, locate the Firmware Update window and upload the Victony extender firmware file. However, you need to be very careful throughout the process. It is recommended because uploading the wrong firmware file on the extender can increase problems for you instead of solving the current one.

4. Reboot the Extender

If you have a bad habit of keeping your Victony WiFi extender on all the time, then it is time to get rid of it. You might be unaware of this but overusing the Victony extender can be an invitation to technical glitches. Chances are that your extender has already invented some. Thus, you need to do away with them. For this, reboot your Victony extender. Here’s how:

• Power off your Victony WiFi extender and unplug it from the wall outlet.

• Set the extender aside for a while.

• Now, re-plug the extender into the power outlet and switch it on.

5. Change the Extender’s Location

Last, but not least, your Victony WiFi extender might also not be helping you boost the WiFi signals because it is not placed appropriately. For your information, there are a lot of factors present in our house that tend to interrupt the WiFi signals emitted by your extender.

Some of them are microwave ovens, refrigerators, televisions, baby monitors, Bluetooth speakers, treadmills, mirrors, fish tanks, aluminum studs, etc. So, keep your Victony WiFi extender away from such things. Moreover, you should maintain a safe distance between your Victony extender and router.

The Bottom Line

This was all about what to do if your Victony WiFi extender not helping boost WiFi signals. Hopefully, your extender will be able to help you access a lag-free internet connection throughout every nook and cranny of the house. However, if you are still feeling out of luck, then the time to pull out the ultimate card has come. Perform Victony WiFi extender reset by pressing the Reset button on your WiFi device. As soon as the extender’s default settings get restored, consider accessing the default web address of the Victony WiFi device in order to set it up again.

If this article has helped you in getting rid of the Victony WiFi extender problem, do share your troubleshooting experience with other users in the comment section.